Sukup Non-Stiffened Farm Bins are grain storage bins designed without stiffeners. These bins offer a cost-effective solution for grain storage, combining durability and efficiency. Even without stiffeners, these bins maintain their structural integrity using heavier gauge, high-quality steel, aligning with the needs of modern agricultural storage. Recognized for user-focused features, these bins are a direct reflection of Sukup's dedication to quality and efficiency.
Each bin showcases Sukup's expertise in engineering, with patented anchor brackets, a safety door, and exceptionally strong roof standards on every model. These features not only enhance the structural integrity of the bins but also ensure long-lasting performance. This focus on durability is crucial for farmers who require reliable storage solutions that can withstand various environmental challenges over time.
Innovation is key in Sukup's design approach, and it is evident in the Non-Stiffened Farm Bins. These bins are designed to optimize storage conditions, providing an efficient and safe environment for grain storage.
Sukup's Non-Stiffened Farm Bins are available in a range of sizes to accommodate different storage requirements, making them a versatile choice for farms of all sizes. This flexibility ensures that Sukup can provide effective storage solutions that cater to the unique needs of each farming operation. By choosing Sukup’s Non-Stiffened Farm Bins, farmers are investing in a product that combines practicality with the latest in storage technology.
Standard Features
- Covered by a 5-year limited warranty
Sukup Farm Bins (B)
- 15'-48' diameter
- 3-10 rings tall
- Bins up to 6 rings tall are designed for general drying and storage which may be equipped with up to a 3 down auger stirring device
- Bins 7 -10 rings tall are designed for storage and aeration only, NOT DRYING
Sukup Farm Heavy Gauge Drying Bins (BD)
- 18' to 48' diameter
- 5 or 6 rings tall
- Bins are designed for general drying, wet holding/working and storage which may be equipped with up to a 5 down auger stirring device with a center unload continuous flow system or recirculating devices
Sidewall Features
- 4" wide corrugation, 44" tall sidewall sheets
- Bolts are SAE Grade 8.0 for added strength with JS1000® coating for exceptional corrosion protection
- 70 ksi tensile strength steel
- Patented 22" anchor brackets provide extra support for the plenum area and are designed to be used with either rolled flange or bolt-on base angle bottom sheet (U.S. Patent # 6,941,712)
- 3/8" bolts on all sidewall rings
Door Features
- Patent Pending catch is mounted to the inner door panel handles providing the catches for the outer door latches
- Safety latch assures the inner panels are closed and secured when properly engaged
- Hammerhead™ door latch (U.S. Patent #8,123,260) allows single-handed operation and ensures easy opening of doors
- Inside door panels open flat against bin wall
- 44" and 66" doors available
- Door step included as standard equipment
Roof Features
- 15'-48' standard roof peak load rating is 5,000 lbs, evenly distributed on peak ring as pure vertical load with uniformly distributed roof snow load calculated from 40 psf ground snow zone or 105 mph wind zone as defined by ASCE7-10 Code
- Rigidized roof panel with 3" ribs that serve as rafters, strengthening the roof sheets
- Sukup's standard double-tab roof clips support roof sheets every 9 3/8" at the eave
- Roof rings are standard on Sukup bins 18' and larger. Exclusive, roof ring clips (U.S. Patent #7,654,048) ensure that roof rings stay in place for years to come.
- 20" x 35.5" oval manhole opening is a comfortable fit for most operators
- Manhole cover is held securely in place by special latches; when open, the lid lays flat against the roof, eliminating the mess of water and soggy bees wings that can accumulate
- 38" peak opening provides approximately 8 ft2 of air exhaust area
- Peak lid cover is mounted on steel rods to allow it to slide open and closed and prevent it from blowing around on windy days
- 5/16" bolts and flange nuts used for all roof connections
General Options
- Top ring punched for stirring track (up to 6 rings tall)
- Bottom bin sheets may be pre-punched for Sukup floor flashing
- Rolled flange or bolt-on base angle
- Transition openings can be pre-cut for Sukup Fans at a nominal charge
Sidewall Options
- Inside & outside ladder packages
- Sidewall stairs
Door Options
- 8-10 ring tall bins can be equipped with an optional 66" door
Roof Options
- 42' & 48' bins have an 8000 lb. roof option (5000 lb. roof standard)
- Continuous Eave Clip provides an even stronger roof to sidewall connection than our standard double-tab roof clips
- Exclusive 18" Poly Roof Vents are virtually indestructible with debris deflectors to prevent dirt, fines and other trash from collecting behind the vent
- 18" roof vent cut-outs feature a 1-1/8" lip around the opening to prevent leakage
- 60" octagonal diamond deck lid
- Ground operated lid opener
- Temperature cable mounting brackets
*Sukup roof load ratings are based on a peak load evenly distributed on peak ring as pure vertical peak load with uniformly distributed roof snow load calculated from 40 psf ground snow zone or 105 mph wind zone as defined by ASCE7-10 Code.
Product Features
- All Bins are manufactured under Sukup Manufacturing Company’s ISO 9001 Certification Requirements
- SAE Grade 8.0 Hardware with JS1000® Hour Plating
- Super Shield® to Provide an Extra Layer of Protection
- G115 Galvanized Roof Sheets
- Anchor Brackets Act as Short Stiffeners
Kerkhoven, MN
